Grappler Flash is unable to communicate properly with the Grappler SCSI host adapter that you have selected. Please contact Technical Support regarding this issue.
A newer version of the ROM is available. Would you like to update it now?
SCSI host adapter configuration and firmware updated successfully! Please reboot your system for changes to take place.
The file you have chosen is incorrect. It is not a correct file to flashed
The file you have chosen is incompatible with the card you want to flash.
Firmware on two channel card can only be updated from the first channel. In addition, the firmware version can only be seen from the first channel as well. Please select the first channel 'ABP-950UW 1' from the 'Select Host Adapter' window and try again.
Update firmware failed. Please contact your technical support.
Congratulations!!! Firmware updated successfully.
Updating Grappler SCSI host adapter firmware.
Your firmware is about to updated on your Grappler SCSI host adapter. This updating may take up to one minute.
Please select the firmware file provided by Orange Micro.
SCSI host adapter not found. Power off your system, verify your host adapter is seated properly by pushing it down into slot or reinsert the host adapter.
Select the slot number for the SCSI controller.
SCSI host adapter configuration updated successfully! Firmware not updated. Please reboot your system for changes to take place.
Welcome to Grappler Flash, a user friendly firmware and configuration setting update utility.
